Place of Origin:
SFC-IEC-A1B series 5 to 14" 15Amp Hardwired Power Strip with 2 Outlets
This hard wired type power strip is good for installation in your kitchen, cabinet, on the rack and so on. It is not for normal wall outlets. There is no power cord and plug with this unit.
|Description:||5 to 14" 2 Outlet Hardwired Power Strip|
|Power Strip Measurement:||L5 to14" x W1.614" x H1.255" (133 to 355 x 45 x 42) *|
|Outlet Color:||Black, white, grey or other|
|Outlet Orientation:||Vertical or level|
|Receptacle Type:||NEMA 5-15R|
|Outlet Spacing:||0.12to 8.39" (3 to 213mm) (center to center)|
|IEC C14 Inlet:||on Top or Bottom Cover or Both Sides or Ends)|
|Voltage Input/Output:||110-125V 60Hz|
|Mounting Tabs:||On both ends or bottom|
|Mounting Clips:||Mounting Clips included|
Installation work of this unit must be done by a professional, a licensed electrician or an electric engineer.
Never install this unit during a thunder storm.
Switch off the power before you start installation work.
This unit is for indoor use only.
This unit is not intended for use in or around wet or potentially wet areas including, but not limited to, aquariums, saunas, showers and fountains.
Risk of Electric Shock!
Before installation, you may need to get a IEC C13 Outlet. Decide your wire gauge, and ask store attendant for assistance what color of connectors you should get) from your local hardware or electric supply or home improvement stores.
Minimum tools required: A fine to medium fine philips screw driver, and a pair of scissors, and a pair of mid size slip joint pliers
1. Turn off electricity in the house
2. Decide where to place this unit
3. Choose the side you want the cord exit to choose IEC C14 Built in power strips
4. Match the color of the wires and secure the wire connection with proper wire connectors built in IEC C13 plug.(different wire gauge use different colored wire connectors)
We also custom manufacture for our customers.
Send your inquiry directly to us